Maintenance List - Panasonic KX-MB2230JT Service Manual

KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT

15.1.2.1. Maintenance List

NO. OPERATION
1 Document Path
2 Rollers
3 Sensors
4 Glass
5 Abnormal, wear and tear
or loose parts
15.1.2.2. Maintenance Cycle (Document & Paper)
If each part has got dirty, clean it with a damp cloth then dry thoroughly.
* These values are standard and may vary depending on usage conditions.
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry thor-
oughly.
Pick up & Registration & Manual paper sensor (IC51), Print tim-
ing sensor (IC50), Toner sensor (IC53), Exit sensor (IC52),
confirm the operation of the sensors.
If the glass is dirty, clean them with a dry soft cloth.
Replace the part. Check if the screws are tight on all parts.
No.
1 Pickup Roller (Ref No.120)
2 Transfer Roller (Ref.No.140)
3 Registration Roller (Ref.No.149)
4 Heat Roller (Ref.No.75)
5 Exit Roller (Ref.No.88)
CHECK
Item Cleaning Cycle
------------
------------
3 months
------------
3 months
308
REMARKS
—
Refer to Maintenance Check Items/Com-
ponent Locations (P.307).
See Maintenance Check Items/Compo-
nent Locations (P.307) and Sensors and
Switches Section (P.66) Test Functions
(P.124).
Refer to Maintenance (P.309).
—