KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
14.4.2. Wire dressing on the Left Side Section(Main Board)(1)
*USB Connector is inserted after assemble ADF.
*Do not contact Lead of USB and Lead of ADF RELAY.
< FG Lead terminal direction >
Main PCB
Cover PSU
Pass the Lead through the main chassis boss.
Core can not be placed on the PCB.
< Core attachment to LEAD of DC Motor >
298
Pass the LEAD through
the main chassis boss. (4 points)
Pass through 3 times,
wind 2 times to core.
(Main PCB side)
50 ~ 60 mm