Panasonic KX-MB2230JT Service Manual page 162

KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
Interface messages
DISPLAY MESSAGE
• IP address of the server or network configuration is incorrect. Consult your network administrator.
• The server is down. Consult your network administrator.
• The cable between the unit and the computer is not connected correctly.Check the connections.
Refer to Installing software (including printer, scanner and other drivers) (P.118).
Refer to Connections (P.120).
• IP address of the server or network configuration is incorrect. Consult your network administrator.
• Your computer may not have enough memory. Change to a lower resolution for scanning and try again.
• The email server configuration requires authentication. Check the configuration of the email server.
• SMB folder is read only. Consult your network administrator.
• When performing scan to email address, the number of scanned pages or the file size of the scanned data
has exceeded the limitation. Divide the document into sections.
Refer to Specifications (P.11).
• When performing scan to FTP server or scan to SMB folder, the number of scanned pages or the file size
of the scanned data has exceeded the limitation. Divide the document into sections.
• Login name or password of the server is incorrect or you do not have permission to login to the server.
Consult your network administrator.
• The server name is incorrect. Consult your network administrator.
• The server is down. Consult your network administrator to activate the server.
• The cable between the unit and the computer is not connected correctly. Check the connections.
Refer to Installing software (including printer, scanner and other drivers) (P.118).
Refer to Connections (P.120).
• Check that the computer is turned ON.
• The path of FTP server or SMB folder is incorrect. Consult your network administrator.
• Check that the computer is turned ON.
• The Multi-Function station's scan application is not running correctly on the computer. Restart your com-
puter and try again.
• If your computer is busy, close other applications.
• Your firewall software is blocking the LAN connection. Disable the firewall software or change the firewall
settings to allow the unit access to your computer.
• The cable between the unit and the computer is not connected correctly. Check the connections.
Refer to Installing software (including printer, scanner and other drivers) (P.118).
Refer to Connections (P.120).
• The computer has some kind of problem. (Example: Make sure that the computer is turned ON.).
• The Multi-Function station's scan application is not running correctly on the computer. Restart your com-
puter and try again.
CAUSE AND REMEDY
162