Maintenance; Maintenance Items And Component Locations; Outline; Maintenance Check Items/Component Locations - Panasonic DP-MB310EU Service Manual

KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU

15 Maintenance

15.1. Maintenance Items and Component Locations

15.1.1. Outline

MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS.
1. Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
2. Check for breakdowns
Look for problems and consider how they arose.
If the equipment can be still used, perform copying, self testing or communication testing.
3. Check equipment
Perform copying, self testing and communication testing to determine if the problem originates from the transmitter, receiver
or the telephone line.
4. Determine causes
Determine the causes of the equipment problem by troubleshooting.
5. Equipment repairs
Repair or replace the defective parts and take appropriate measures at this stage to ensure that the problem will not recur.
6. Confirm normal operation of the equipment
After completing the repairs, conduct copying, self testing and communication testing to confirm that the equipment operates
normally.
7. Record keeping
Make a record of the measures taken to rectify the problem for future reference.

15.1.2. Maintenance Check Items/Component Locations

Resist Roller
Resist Sensor
(Manual Single feed Sensor)
Pick up Roller
(MPT)
Paper Sensor
(MPT)
Pick Up Sensor
Paper Feed Roller
Cassette Sensor
Separation Roller
Returd Pad
Pick up Roller
Pick Up Sensor
OPF Feed Roller
Separation Roller
Returd Pad
Print timing Sensor
LSU
ADU Sensor
Paper Empty Sensor
Paper Empty Sensor
Pick up Roller
OPC
Exit Roller
Thermistor
316
Thermostat
Heat Roller
Exit Sensor
Pressure Roller
Transfer Roller
ADU Feed Roller