Opening The Web-Based Ui Of Select Camera; Using Upnp Of Windows Xp Or Vista; Windows Xp - Planet ICA-HM830W User Manual

2.5.2 Opening the Web-based UI of Select Camera

If IPInstaller finds IP Camera, please select the device you want to view and click the "Open
Web" button. Then you could see the video from IP Camera directly.
1. To access the Web-based UI of the selected unit, run the menu bar > Open web on the
menu bar.
If the Internet Camera is configured correctly, the default Web browser will open to the home page
of the selected device.
If you find your browser is opened and automatically connected to the camera Home Page, it
means you've assigned an IP Address to the unit successfully. Now you can close the IP Installer
and start to use your camera.

2.6 Using UPnP of Windows XP or Vista

2.6.1 Windows XP
UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled device. If the operating system, Windows XP, of your PC is UPnP enabled, the Internet
Camera will be very easy to configure. Use the following steps to enable UPnP settings only if your
operating system of PC is running Windows XP.
Please note that MS Windows 2000 does not support UPnP feature.
Go to Start > Settings, and Click Control Panel
2 Mega-Pixel Wireless Fish-Eye IP Camera
21
ICA-HM830W