press the PTT button to move to the next
programming feature without saving.
The values available for maximum channel settings
are dependent on the maximum number of channels
the radio supports.
PROGRAMMING CALL TONES
Call Tones feature allows you to transmit an audible
tone to other radios on the same channel to alert them
that you are about to talk or to alert them without
speaking.
In 'Call Tone Selection Mode' you can configure the
type of call tone for the radio. The settings available
are dependent on the maximum number of call tones
your radio supports.
To program Call Tones, enter the Advanced
Configuration Mode and scroll up or down through the
programming modes until your display radio shows
the 'Programming Call Tones' selection by short
pressing the PTT button or (Menu) button.
The radio display shows the Programming Call Tone'
as follows:
The radio display blinks the current call tone setting.
You can select the desired call tone value (0,1,2 or 3)
by pressing the Programmable Button A and
Programmable Button B buttons. Each time you select
a different value, your radio sounds the selected call
tone (except for value '0'). Once you have selected
the desired call tone, long press the PTT button to exit
and save, or short press the PTT button to move to
the next programming feature without saving.
Note:
The values available for Call Tones settings
are dependent on the values programmed
via the CPS. Call Tones is disabled when
the value is set to '0'.
PROGRAMMING MICROPHONE GAIN
LEVEL
To configure the Microphone Gain Level, enter the
Advanced Configuration Mode and scroll up or down
39
English