Programming The Available Channel; Programming Call Tones - Motorola Radius CP100 Commercial Series User Manual

Note: Spirit GT radios operate at 12.5 kHz. SP21 radios may operate at 25.0 kHz or
12.5 kHz bandwidth if selectable. If you have questions on radio use, call 1-
800-927-2744.

Programming the Available Channel

For applications requiring fewer channels, you can reduce the number of available
channels from 15. Older CP100 radios may not have this feature. Call 1-800-927-
2744 for more information.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 23.
2. Press \ until
3. Press [ or ] to select the number of channels you want available.
4. Press and hold M to exit k.
Note: Programming settings for channels made unavailable are retained by the
radio.

Programming Call Tones

Your radio can transmit call tones to other radios in your group so
you can alert them that you are about to talk. The default is set to 0
(off) or you may choose 1, 2, or 3 to choose a distinctive call tone.
1. Enter Programming Mode as necessary, refer to "Entering
Programming Mode" on page 23.
2. Press \ until E displays.
appears.
CH
E
27