Download  Print this page

Motorola RDV2020 - RDX VHF - Radio User Manual

Rdx series
Hide thumbs

Advertisement

Advertisement

loading

  Related Manuals for Motorola RDV2020 - RDX VHF - Radio

  Summary of Contents for Motorola RDV2020 - RDX VHF - Radio

  • Page 3: Table Of Contents

    LED Indicator ..... 12 CONTENTS Side Buttons ..... 12 The Lithium-Ion (Li-Ion) Battery .
  • Page 4 Getting Started ..... .29 Reading CTCSS/DPL Values ..40 Reading Auto-Scan Values ..41 Turning radio ON/OFF.
  • Page 5 4W/5W RDX models ....75 Cloning Radio using Motorola Limited Warranty for the United the Radio to Radio (R2R) Cloning States and Canada ....76 Cable (Optional Accessory) .
  • Page 6: Safety

    For a list of Motorola-approved antennas, SAFETY batteries, and other accessories, visit the following website which lists approved PRODUCT SAFETY AND RF accessories: EXPOSURE COMPLIANCE www.motorolasolutions.com/RDX Before using this product, read the operating instructions and RF energy awareness information contained in the Product...
  • Page 7: Introduction

    Thank you for purchasing the Motorola® RDX 8000 West Sunrise Boulevard Series™ Radio. This radio is a product of Plantation, Florida 33322 Motorola's 75 plus years of experience as a world leader in the designing and PACKAGE CONTENTS manufacturing of communications equipment.
  • Page 8 For a copy of a large-print version of this user For product information visit us at: guide or for product-related questions, contact: www.motorolasolutions.com/RDX 1-800-448-6686 in the USA 1-800-461-4575 in Canada 1-866-522-5210 on your TTY (Text Telephone) English...
  • Page 9: Batteries And Chargers

    Use of accessories not recommended by To reduce risk of electric shock, unplug the Motorola may result in risk of fire, electric charger from the AC outlet before attempting shock, or injury.
  • Page 10: Operational Safety Guidelines

    OPERATIONAL SAFETY • The outlet to which this equipment is connected should be nearby and easily accessible. GUIDELINES • Maximum ambient temperature around the power • Turn the radio OFF when charging battery. supply equipment must not exceed 40°C (104°F). •...
  • Page 11: Fcc Licensing Information

    (FCC). To transmit on these frequencies, you FCC LICENSING are required to have a license issued by the INFORMATION FCC. Application is made available on FCC Form 601 and Schedules D, H, and Remittance INTERFERENCE INFORMATION Form 159. This device complies with Part 15 of the FCC To obtain these FCC forms, request document Rules.
  • Page 12 Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with...
  • Page 13: Radio Overview

    RADIO OVERVIEW PARTS OF THE RADIO Antenna Channel Selector Knob On/Off/Volume Microphone Knob LED Indicator PTT Button Accessory Connector SB1-Monitor Button Model Label SB2- Scan/ Lithium-Ion Nuisance Battery Channel Delete English...
  • Page 14: On/Off/Volume Knob

    On/Off/Volume Knob Side Buttons Used to turn the radio ON or OFF and to adjust Push-to-Talk (PTT) Button the radio’s volume. • Press and hold down this button to talk, release it to listen. Channel Selector Knob Side Button 1 (SB1) Used to switch the radio to different channels.
  • Page 15 This User Guide covers multiple RDX Series™ speaker, and provides you the following models, and may detail some features your information: radio does not have. The radio’s model is shown on the front of the radio, underneath the Transmit Number of Frequency Model Power...
  • Page 16: Battery Features

    It also offers the Motorola batteries are designed specifically to option to use Alkaline batteries. be used with a Motorola charger and vice versa. Charging in non-Motorola equipment About the Li-Ion Battery may lead to battery damage and void the The RDX Series™...
  • Page 17: Battery Recycling And Disposal

    1-800-8-BATTERY specific requirements and information in your This internet site and telephone number also area. Motorola fully endorses and encourages provides other useful information concerning the recycling of Li-Ion batteries. In the U.S. and recycling options for consumers, businesses Canada, Motorola participates in the and governmental agencies.
  • Page 18: Installing The Lithium-Ion (Li-Ion) Battery

    Turn OFF the radio. Turn OFF the radio. With the Motorola logo side up on the battery Push down the battery latch and hold it pack, fit the tabs at the bottom of the battery depressed while removing the battery.
  • Page 19: Alkaline Battery Pack (Optional Accessory)

    Alkaline Battery Pack (Optional Accessory) Installing Alkaline Batteries Removing Alkaline Batteries Alkaline Alkaline Battery Battery Door Door Turn OFF the radio, if it is turned ON. Turn OFF the radio, if it is turned ON. Remove Li-Ion battery. Slide the battery latches, on both sides of the Assemble alkaline battery pack in the same battery, downwards.
  • Page 20: Attaching And Removing Antenna

    Attaching and Removing Antenna These instructions apply ONLY to models RDU4100 and RDV5100. Do not attempt to remove the antenna if your radio is not one of these models. Attaching the Antenna Removing the Antenna Align the threaded end of the antenna with the Turn the antenna counterclockwise until you radio’s antenna connector.
  • Page 21: Installing Spring Action Belt Clip

    Installing Spring Action Belt Clip Power Supply, Adaptor and Drop-in Tray Charger Belt Clip Power Supply Spring Action Belt Drop-in Tray Charger Clip The radio is equipped with one Drop-in Tray Charger and one Power Supply with Adaptor. Slide the spring action belt clip rails into the belt For details, see “Chargers”...
  • Page 22: Battery Life Information

    Battery Life Information When the Battery Save feature is ON (enabled by default) the battery life will be longer. The following chart summarizes battery life estimations: Li-Ion Battery Life with Battery Save feature ON Battery Type 5 Watts 4 Watts 2 Watts Standard 8.5 hours...
  • Page 23: Alkaline Battery Life

    Alkaline Battery Life The following chart estimates the Alkaline battery life: Alkaline Battery Life Battery Save Feature 5 Watts 4 Watts 2 Watts 26 hours* 26 hours* 26 hours Notes: • Battery life are being estimated based on 5% transmit/ 5% receive/ 90% standby standard duty cycle.
  • Page 24: Charging The Battery

    The radio comes equipped with a Standard Power Supply (Transformer) Charger To charge the battery (with the radio attached), place it in a Motorola-approved Drop-in Tray Single Unit Charger or Drop-in Tray Multi Unit Charger. Drop-in Tray Charger Drop-in Tray...
  • Page 25 Charging a Standalone Battery Charging a Standard Battery The drop-in tray charger has a removable bracket that is adjustable depending on the type of battery that needs to be charged. It is designed to charge either the battery (with the radio) or a standalone battery.
  • Page 26 Charging a High Capacity or Ultra Repeat same procedure to return to the High Capacity Battery charging a Standard Battery position. Label on the removable bracket should show ‘Standard Removable Battery’ facing front. Piece Note: Make sure the bracket is assembled Removable Turn around Piece...
  • Page 27 Drop-in Tray Charger LED Indicators Standard Charger LED Indicator Status LED Status Comments Steady red indication for 3 Power ON The charger has powered up seconds Charging Blinking red (slow) The charger is currently charging Charging Steady red indication Battery is fully charged Complete Battery Fault(*) Blinking red (fast)
  • Page 28 Rapid Charger LED Indicator Status LED Status Comments Steady green indication for 3 Power ON The charger has powered up seconds Charging Blinking green The charger is currently charging Top-off Charging Blinking green (slow) Battery is near fully charged Charge Steady green indication Battery is fully charged Complete...
  • Page 29 Estimated Charging Time The following table provides the estimated charging time of the battery. For further details, see “Battery” on page 80. Estimated Charging Time Battery Type Charging Solution Ultra High Standard High Capacity Capacity Standard Charging 7 hours 12 hours 13 hours Solution Rapid Charging...
  • Page 30 Charging a Radio and Battery using Notes: a Multi Unit Charger- MUC (Optional • This Multi Unit Charger also allows you to clone Accessory) up to 3 radios (3 Source radios and 3 Target radios). Refer to page 51 for details. •...
  • Page 31: Getting Started

    SELECTING A CHANNEL GETTING STARTED To select a channel, rotate the Channel Selector Knob and select the desired channel For the following explanations, refer to “Parts of number. the Radio” on page 11. Program each channel separately. Each TURNING RADIO ON/OFF channel has its own Frequency, Interference To turn ON the radio, rotate the On/Off/Volume Eliminator Code and Scan Settings.
  • Page 32: Receiving A Call

    Notes: TALK RANGE • To listen to all activity on a current channel, short TALK RANGE press the SB1 to set the CTCSS/DPL code to 0. This feature is called ‘CTCSS/DPL Defeat Industrial Multi-Level (Squelch set to SILENT)’. Model Inside steel/concrete Inside multi-level •...
  • Page 33 To establish a proper two-way communication, Scramble Code: Codes that make the the channel, frequency, and interference transmissions sound garbled to anyone eliminator codes must be the same on both listening who is not set to that specific code. radios. This depends on the stored profile that For details on how to set up frequencies and has been preprogrammed on the radio: CTCSS/DPL codes in the channels, refer to...
  • Page 34: Radio Led Indicators

    RADIO LED INDICATORS RADIO STATUS LED INDICATION Channel Alias Edit Red heartbeat Channel Busy Solid orange Cloning Mode Two orange heartbeats Cloning In Progress Solid orange One green blink, one orange blink, one green blink, then repeat for 4 Fatal Error at Power up seconds Low Battery Orange blink...
  • Page 35: Hands-Free Use/Vox

    Accessory Port/ VOX can be temporarily disabled by pressing Connector the PTT button or by removing the audio accessory. Motorola RDX Series™ radios can operate hands-free (VOX) when used with compatible Note: To order accessories, refer to: www.motorolasolutions.com, VOX accessories.
  • Page 36: Setting Vox Sensitivity

    Setting VOX Sensitivity Battery Save The sensitivity of the radio's accessory or Battery Save feature extends battery life as microphone can be adjusted to suit different your radio goes into ‘Idle’ state. To enable/ operating environments. VOX sensitivity can disable press SB1 and SB2 buttons be programmed via the CPS.
  • Page 37: End Of Transmission Tone (Roger Beep Tone)

    End of Transmission Tone (Roger Beep Tone) To enable/disable End of Transmission Tone, short press the SB1 button while turning ON the radio . Note: This setting is set to OFF by default English...
  • Page 38: Programming Features

    The Interference Eliminator Code (CTCSS/ PROGRAMMING DPL) helps minimize interference by providing FEATURES you with a choice of code combinations that filter out static, noise, and unwanted To easily program all the features in your radio, messages. it is recommended to use the CPS Programming Cable and CPS software.
  • Page 39 PROGRAMMING MODE Frequencies CTCSS/DPL First Third Second First Second Digit Digit Digit Digit Digit Long Long Auto - Scan Idle Enter Programming Mode Programming ON / (PTT + SB1 + Turn ON radio) “Roll Over” Mode key chirp Long Exit Figure 1: Entering Programming Mode English...
  • Page 40 Programming Mode: Reading the Values LED Indication Number Confirmation Beep Zero beep One orange blink One beep One short red blink Two beeps Two short red blinks Three beeps Three short red blinks Four beeps Four short red blinks Long beep One long red blink Long beep and one beep One long and one short red blinks...
  • Page 41: Entering Programming Mode

    Entering Programming Mode Once you are in the 'Idle' Programming Mode, you will be able to read the Frequencies, Note: Before programming the features, make Codes and Auto-Scan setting by short pressing sure your radio is set to the channel you the PTT button to move along the different wish to program.
  • Page 42: Reading Ctcss/Dpl Values

    value. If you short press the PTT button again, You will have to read three digits as RDX the radio will signal you the second digit value. Series™ have up to 213 codes available (refer to “Frequencies and Codes Charts” Section). PROGRAMMING M The following is an example of the order in which your radio will be signaling the ‘118’...
  • Page 43: Reading Auto-Scan Values

    Reading Auto-Scan Values Programming Frequencies, Codes and Auto-Scan After reading the CTCSS/DPL codes, short Each time your radio signals and beeps the press the PTT button and the radio will take current setting you can change this setting by you to Auto-Scan (refer to Stage 3 of Figure 3: either increasing it by short pressing SB1 or Entering Programming Mode on page 40).
  • Page 44: Programming Mode Faq

    I am trying to program a frequency (or • If you ‘roll-over’ to the beginning at Idle Programming Mode you will hear a ‘chirp’ and the code) value but the radio would not do it. LED Indicator will start blinking green again. All It rolled over and took me back to value values that were changed will be automatically ‘0’.
  • Page 45: Programming Values Example

    When I was programming I made a I am done programming the features in mistake and programmed the wrong this channel and want to program another value. How can I erase it or re-program channel. Switch to the new channel you wish to program by using the Channel Selector Knob.
  • Page 46: Code

    Example of Programming a Code • Short press the PTT button to enter Frequency Mode. Radio will signal current value ‘0’ (orange Assuming current code value is set to factory blink) default ‘001’, and you want to change it to •...
  • Page 47: Auto-Scan

    Example of Programming Auto-Scan • Short press the PTT button and move ahead to program the third digit. LED Indicator will blink Auto-Scan is the last Programming Mode and red to indicate current value is ‘1’. can be set to either ON or OFF on a particular •...
  • Page 48: Other Programming Features

    OTHER PROGRAMMING FEATURES which was selected before Scan was activated. If no transmission occurs within five seconds, Scan scanning will resume. Scan allows you to monitor other channels to • If you want to scan a channel without Interference detect conversations. When the radio detects a Eliminator Codes (CTCSS/DPL), set the code transmission, it will stop scanning and will stop settings for the channels to ‘0’...
  • Page 49: Editing Scan List

    Editing Scan List To delete a channel from the Scan List: Scan Lists can be edited by using the CPS • Start Scan by short pressing the SB2 button (*) (refer to CPS section on page 48) • Wait until the radio stops on the channel you wish to eliminate, then long press the SB2 button to Nuisance Channel Delete delete it.
  • Page 50: Cps (Computer Programming Software)

    Section at the end of the user guide for more available for free as web based downloadable details. software at: Note: CPS Programming Cable (P/N RKN4155) www.motorolasolutions.com/RDX is an accessory sold separately. Please contact your Motorola point of purchase for more information. English...
  • Page 51: Time-Out Timer

    Time-Out Timer Battery Type Setting When pressing the PTT button, transmissions The RDX Series™ radio can be powered by can be terminated by setting up a 'time-out’ either Alkaline or Lithium-Ion batteries. timer. Call Tones Power Select Call Tones feature allows you to transmit to Power Select allows you to select between other radios in your group by alerting them that high and low transmission power per frequency...
  • Page 52: Scramble

    Scramble Notes: • The features described in previous pages are just The Scramble feature makes transmissions some of the features CPS has. CPS offers more sound garbled to anyone listening without the capabilities. For more information refer to the same code. Scramble default value is OFF. HELP file in the CPS.
  • Page 53: Cloning Radios

    CLONING RADIOS or copied from) and • a Target radio (the radio which profile will be You can clone RDX Series™ radio profiles from cloned from the source radio.) one Source radio to a Target radio by using any one of these 3 methods: The Source radio has to be in Pocket 1, 3 or 5 while the Target radio has to be in Pocket 2, 4 •...
  • Page 54 (*) MUC pockets numbers should be read from ‘chirp’ whereas the ‘fail’ tone sounds similar to a left to right with the Motorola logo facing front. ‘bonk’ tone. If the Source radio is a display model, it will either show ‘Pass’ or ‘Fail’ on the display (a tone will be heard within 5 seconds).
  • Page 55: Cloning Radio Using The Radio To Radio (R2R) Cloning Cable (Optional Accessory)

    Cloning Radio using the Radio to Radio Unplug any cables (power supply or USB (R2R) Cloning Cable (Optional Accessory) cables) from the SUCs. Plug one side of the cloning cable mini connector to one SUC. Plug the other end to the second SUC.
  • Page 56 Note: This cloning cable is designed to operate What To Do if Cloning Fails only with compatible Motorola RLN6175 (Standard) and RLN6304 (Rapid) Single The radio will emit an audible ‘bonk’ indicating Unit Chargers. that the cloning process has failed. In the event...
  • Page 57: Cloning Using The Cps (Computer Programming Software)

    Cloning using the CPS (Computer Information on how to clone using the CPS is Programming Software) available either in: When cloning using this method, you will need • the CPS Help File --> Content and Index --> to have the CPS software, a Drop-in Tray Cloning Radios, or Charger and the CPS Programming Cable.
  • Page 58: Troubleshooting

    TROUBLESHOOTING Symptom Try This... Recharge or replace the Li-Ion battery. Reposition or replace AA batteries. No Power Extreme operating temperatures may affect battery life. Refer to See “About the Li-Ion Battery” on page 14. Confirm Interference Eliminator Code is set. Frequency or Interference Eliminator Code may be in use.
  • Page 59 Symptom Try This... Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio. To increase range and coverage, you can either Limited talk range reduce obstructions, increase power, or use UHF radio instead of VHF radio.
  • Page 60 Symptom Try This... Radios are too close; they must be at least five feet apart. Heavy static or interference Radios are too far apart or obstacles are interfering with transmission. Refer to “Talking and Monitoring” on page 29. Recharge or replace Li-Ion battery. Replace AA batteries. Low batteries Extreme operating temperatures affect battery life.
  • Page 61 Symptom Try This... VOX feature might be set to OFF. Use the CPS to ensure that the VOX Sensitivity level is not set to ‘0’. Cannot activate VOX Accessory not working or not compatible. Refer to “Hands-Free Use/VOX” section on page 33. Check drop-in tray charger is properly connected and correspond to a compatible power supply.
  • Page 62: Use And Care

    USE AND CARE Use a soft damp cloth Do not immerse Do not use alcohol or to clean the exterior in water cleaning solutions If the radio is submerged in water... Turn radio OFF and Dry with soft cloth Do not use radio until remove batteries completely dry English...
  • Page 63: Frequency And Code Charts

    The charts in this section provide Frequency and Code information. These charts are useful when using Motorola RDX Series™ two-way radios with other business radios. Most of the frequency’s positions are the same as Spirit M, GT, S, and XTN Series Frequencies.
  • Page 64 Notes: • (*) Due to FCC regulations these frequencies (six in total) are different from the previous Motorola Legacy Series radios. This means that if you select the RDX radio in one of these frequencies the radio will not inter-operate with an XTN radio. In order for a RDX radio to inter-operate with an XTN radio, make sure you choose any of the frequencies (21 in total) that are common for both radios.
  • Page 65: Default Frequencies Chart

    RDV2020 - VHF DEFAULT FREQUENCIES CHART BRUS RDX VHF 2CH Radios Default Frequencies - RDV2020 Frequency Channel Frequency # Code # Code Bandwidth (MHz) 154.4900 67.0 Hz 12.5 kHz 154.5150 67.0 Hz 12.5 kHz English...
  • Page 66: Default Frequencies Chart

    RDV5100 - VHF DEFAULT FREQUENCIES CHART RDX VHF 10CH Radios Default Frequencies - RDV5100 Frequency Channel Frequency # Code # Code Bandwidth (MHz) 151.6250 67.0 Hz 12.5 kHz 151.6250 77.0 Hz 12.5 kHz 151.6250 88.5 Hz 12.5 kHz 151.6250 179.9 Hz 12.5 kHz 151.6250 12.5 kHz...
  • Page 67: Rdx Uhf Frequencies Chart

    RDX UHF FREQUENCIES CHART RDX UHF Frequencies Frequency Frequency Frequency # Bandwidth Frequency # Bandwidth (MHz) (MHz) 464.5000 12.5 kHz 461.1625 12.5 kHz 464.5500 12.5 kHz 461.1875 12.5 kHz 467.7625 12.5 kHz 461.2125 12.5 kHz 467.8125 12.5 kHz 461.2375 12.5 kHz 467.8500 12.5 kHz 461.2625...
  • Page 68 RDX UHF Frequencies (Continued) Frequency Frequency Frequency # Bandwidth Frequency # Bandwidth (MHz) (MHz) 462.8625 12.5 kHz 466.1375 12.5 kHz 462.8875 12.5 kHz 466.1625 12.5 kHz 462.9125 12.5 kHz 466.1875 12.5 kHz 464.4875 12.5 kHz 466.2125 12.5 kHz 464.5125 12.5 kHz 466.2375 12.5 kHz 464.5375...
  • Page 69 RDX UHF Frequencies (Continued) Frequency Frequency Frequency # Bandwidth Frequency # Bandwidth (MHz) (MHz) 467.8375 12.5 kHz 467.1875 12.5 kHz 467.8625 12.5 kHz 467.4625 12.5 kHz 467.8875 12.5 kHz 467.4875 12.5 kHz 467.9125 12.5 kHz 467.5125 12.5 kHz 469.4875 12.5 kHz 451.1875 12.5 kHz 469.5125...
  • Page 70 RDX UHF Frequencies (cont.) Frequency Frequency Frequency # Bandwidth Frequency # Bandwidth (MHz) (MHz) 452.5375 12.5 kHz 456.4375 12.5 kHz 452.4125 12.5 kHz 456.5375 12.5 kHz 452.5125 12.5 kHz 456.6375 12.5 kHz 452.7625 12.5 kHz 457.3125 12.5 kHz 452.8625 12.5 kHz 457.4125 12.5 kHz 456.1875...
  • Page 71: Default Frequencies Chart

    RDU2020 - UHF DEFAULT FREQUENCIES CHART RDX UHF 2CH Radios Default Frequencies - RDU2020 Frequency Channel Frequency # Code # Code Bandwidth (MHz) 464.5500 67.0 Hz 12.5 kHz 467.9250 67.0 Hz 12.5 kHz English...
  • Page 72: Default Frequencies Chart

    RDU4100 - UHF DEFAULT FREQUENCIES CHART RDX UHF 10 CH Radios Default Frequencies - RDU4100 Frequency Channel Frequency # Code # Code Bandwidth (MHz) 464.5000 67.0 Hz 12.5 kHz 464.5000 77.0 Hz 12.5 kHz 464.5000 88.5 Hz 12.5 kHz 464.5000 179.9 Hz 12.5 kHz 464.5000...
  • Page 73: Ctcss And Pl/Dpl Codes

    CTCSS AND PL/DPL CODES CTCSS Codes CTCSS CTCSS CTCSS 67.0 107.2 167.9 71.9 110.9 173.8 74.4 114.8 179.9 77.0 118.8 186.2 79.7 192.8 82.5 127.3 203.5 85.4 131.8 210.7 88.5 136.5 218.1 91.5 141.3 225.7 94.8 146.2 233.6 97.4 151.4 241.8 100.0 156.7...
  • Page 74 PL/DPL Codes Code Code Code English...
  • Page 75 PL/DPL Codes (Continued) Code Code Code Customized PL Customized PL Customized PL Customized PL Customized PL Customized PL Inverted DPL 39 Inverted DPL 40 Inverted DPL 41 Inverted DPL 42 Inverted DPL 43 Inverted DPL 44 Inverted DPL 45 Inverted DPL 46 Inverted DPL 47 English...
  • Page 76 PL/DPL Codes (Continued) Code Code Code Inverted DPL 48 Inverted DPL 65 Inverted DPL 82 Inverted DPL 49 Inverted DPL 66 Inverted DPL 83 Inverted DPL 50 Inverted DPL 67 Inverted DPL 84 Inverted DPL 51 Inverted DPL 68 Inverted DPL 85 Inverted DPL 52 Inverted DPL 69 Inverted DPL 86...
  • Page 77: Programming Customized Frequencies On 4W/5W Rdx Models

    VHF and UHF charts in previous pages). VHF range is 146 -174 MHz and UHF 438 - 470 MHz. 4W/5W models can also be programmed to work with repeaters. Please contact your Motorola point of purchase for details. English...
  • Page 78: Motorola Limited Warranty For The United States And Canada

    This limited warranty is a consumer's exclusive Repaired or Replaced. to the consumer, whichever is longer. remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States, which are accompanied by this written warranty.
  • Page 79 (c) use of the Products or Accessories for nonconforming or non-Motorola housings, or commercial purposes or subjecting the Product or parts, are excluded form coverage. Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. English...
  • Page 80 Accordingly, any copyrighted software third parties, that the operation of the software contained in the Motorola products may not be products will be uninterrupted or error free, or that modified, reverse-engineered, distributed, or...
  • Page 81 United States of America. The any license under the copyrights, patents, or Governments of the United States of America may patent applications of Motorola or any third party restrict the exportation or re-exportation of this software provider, except for the normal, non- product to certain destinations.
  • Page 82: Accessories

    ACCESSORIES Part No. Description ANTENNAS 53865 Headset w/Swivel Boom Mic Part No. Description 53866 Earbud w/Clip PTT Mic BR UHF Stubby Antenna 450-470 56517 Earpiece w/Inline Mic RAN4033 RLN6423 Swivel Earpiece BR VHF Helical Antenna 146-174 RAN4041 BATTERY UHF Whip Antenna 438 - 470 RAN4031 Part No.
  • Page 83: Carry Accessories

    CARRY ACCESSORIES CABLES Part No. Description Part No. Description RLN6302 Hard Leather Carry Case RLN6303 Radio to Radio Cloning Cable RLN6307 Spring Action Belt Clip RKN4155 CPS Programming Cable POWER SUPPLIES AC PIN ADAPTORS CHARGERS Part No. Description Part No. Description RLN6349 North America AC Pin Adaptor...
  • Page 84: Power Supplies

    POWER SUPPLIES Attention: Certain accessories may be or may not be available at the time of purchase. For latest Part No. Description information on accessories, contact your Motorola point of purchase or visit: Standard US Fixed Power www.motorolasolutions.com/RDX RPN4054 Supply (*) Americas Rapid Charging Kit includes Power Supply, Drop-in Tray Charger, and AC Pin adaptors.
  • Page 85: Rdx Series™ Features Summary

    RDX Series™ Features Summary Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Backlight 5 Seconds Choose the backlight’s time out by using the CPS. Front panel programming available only on display models by entering Programming Mode (1).
  • Page 86 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Front panel radio programming available only for Display Models by going into Programming OFF / Call Tones (4) Mode(1). Values available are 0 (OFF),1, 2 and 3. BUTTON A To enable/disable Call Tones press Button A (default button).
  • Page 87 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Enables radio to enter cloning mode in order to clone its profile settings into other radios (using Radio to Radio Cloning Cable or Multi-Unit Cloning Mode Charger).
  • Page 88 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Allows you to customize frequencies in your radio. Any value within Frequencies, Available only for certain 4W/5W radio models. Direct Input radio frequency band Radios Bandwidth is fixed and non-programmable.
  • Page 89 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Available for Display models only. Allows user to IVOX, HIGH sensitivity specify IVOX sensitivity level. For front panel radio (Level 3) Level programming use the MENU button. Keypad Beep ( Press SB2 while turning ON radio to enable/disable or Keypad...
  • Page 90 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Front panel radio programming (only Display models): Set radio to Programming Mode(1) to get Model and CPS Maximum the Maximum Channels Menu option. programmable Channels (2) dependant...
  • Page 91 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Press SB2 to start scanning and wait until the radio lands on the channel you want to delete. Long press SB2 to delete the channel. Nuisance Ch SB2 Button Delete (4)
  • Page 92 Display Display Text that shows up in the radio display when turned Power up Text MOTOROLA ON. Default text is MOTOROLA. Programmable via CPS. Repeater/ Available only for RDU4160d model. Talkaround (3) Allows to restore radio's factory defaults. Press PTT,...
  • Page 93 Programmable Via Programmable via RADIO PANEL Features Default Value Programming Tips Non- Non- Display Display Display Display Scan SB2 Button Short press SB2 to enable/disable scan. Use CPS for editing Scan List (adding/removing ON - All channels to be scanned). For display models only: Scan List Channels you can add/delete channels in the scan list using...
  • Page 94 (2) Using CPS you can prevent this feature to be programmed via front panel radio. (3) Contact your Motorola Point of purchase for enabling this feature and/or for radio models details. (4) For Non-Display Models, feature can be enabled for front panel programming by assigning feature to SB1 or SB2. For Display models: Feature can be enabled to any of the programmable buttons rather than the default ones.
  • Page 95: Programmable Buttons Chart

    Programmable Buttons Chart Scan / Channel Channel Button Monitor Nuisance Call Tone Power Select Scramble Backlight No Operation Preset 1 Preset 2 Delete Default Default Default BUTTON A (*) Default BUTTON B (*) Default BUTTON C (*) Notes: • Buttons come programmed to default functions. Using CPS you can assign one of the features shown in the chart, so the button can toggle values using radio front panel •...
  • Page 96: Icons Chart

    Icons Chart Icon Symbol Comments Battery Level Displayed during normal radio mode operation, displays battery life remaining Channel Displayed during normal radio operation and when programming channel features Code Displayed during normal radio operation and when programming codes features Frequency Displayed during normal radio operation and when programming frequency features Keypad lock Displayed whenever the Keypad lock feature is enabled (keypad is locked)
  • Page 97 Icon Symbol Comments Power Select Displayed whenever the channel is transmitting or set to a high-power selection Signal RSSI Display Icon numbers of bars will indicate the strength of the received signal. Strength Vox/IVox Displayed when IVOX/VOX enabled or when programming MIC / MIC gain features.
  • Page 98 Notes...
  • Page 100 *NNTN8301A* NNTN8301A © 2007, 2011 Motorola Solutions, Inc. All rights reserved. *6871663M01* MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of 6871663M01-B their respective owners.