Programming The Available Channel; Programming Call Tones; Programming Microphone Gain; Editing The Scan List - Motorola XU2100 User Manual

4. Press and hold M to exit k.
Note: Spirit GT radios operate at 12.5 kHz. The M Series radios may operate at
25.0 kHz or 12.5 kHz bandwidth if selectable. If you have questions on radio
use, call 1-800-448-6686.
Programming the Available Channel (XU2600 and XV2600 only)
For applications requiring fewer channels, you can reduce the number of available
channels from 6. Older XTN radios may not have this feature. Call 1-800-448-6686
for more information.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 31.
2. Press \ until = appears.
3. Press [ or ] to select the number of channels you want available.
4. Press and hold M to exit k.
Note: Programming settings for channels made unavailable are retained by the
radio.

Programming Call Tones

Your radio can transmit call tones to other radios in your group so
you can alert them that you are about to talk. The default is set to 0
(off) or you may choose 1, 2, or 3 to choose a distinctive call tone.
1. Enter Programming Mode as necessary, refer to "Entering
Programming Mode" on page 31.
2. Press \ until E displays.
3. Press [ or ] to hear and select the call tone you want.
Note: The default is set to 0 (off) or you may choose 1, 2, or 3 to choose a
distinctive call tone.
4. Press and hold M to exit k.
Once enabled, press B to transmit the call tone to others.

Programming Microphone Gain

The sensitivity of your radio's microphone can be adjusted to suit different users or
operating environments.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 31.
2. Press \ until g and
3. Press [ or ] to select the sensitivity level.
= High sensitivity, for quiet environments
3
= Medium sensitivity, the default setting
2
= Low sensitivity, for loud environments
1
4. Press and hold M to exit k.
Editing the Scan List (XU2600 and XV2600 only)
X
To avoid hearing transmissions from unnecessary channels while scanning and to
decrease scan time, you can edit the scan list to skip unneeded channels.
36
(Gain) display.
?
E
X
35
?
3