Nuisance Channel Delete - Motorola RDU4160d User Manual

The radio display shows the current channel alias
name and channel number blinking as follows:
Choose the channel number you want to edit by
rotating the Channel Selector Knob. Once you have
selected the channel number, short press the PTT
button or (Menu) button to start editing the channel
alias name.
The character to be changed starts blinking. If it's a
blank character, a cursor starts blinking.
To change character, press the and buttons until the
desired character is reached. To move to next
character on the right, press the (Menu) button. The
character sequence is [A-Z], "", (Blank Space), [0-9]
and Special Characters. No lower case is allowed.
Long press the PTT button to save and go back to the
'Channel Alias Mode' to choose other channel to edit
the alias name or turn OFF the radio to exit without
saving the changes
Note: If the channel alias name is left blank, long
pressing the PTT button does not save or
leave the alias name.

Nuisance Channel Delete

Nuisance Channel Delete allows you to temporarily
remove channels from the Scan List. This feature is
useful when irrelevant conversations on a 'nuisance'
channel ties up the radio's scanning feature.
To delete a channel from the Scan List:
• Start Scan mode by short pressing the SB2(*)
button.
• Wait until the radio stops at the channel you wish
to eliminate. Long press the SB2 button to delete
it. You cannot delete the channel with scan
enabled (home channel).
• The channel will not be scanned again until you
exit the Scan mode by short pressing the SB2
button again or by turning OFF the radio and
back ON.
Note: (*) This assumes the SB2 button is not
programmed for a different mode.
43
English