Programming Maximum Number; Of Channels; Programming Call Tones - Motorola RMU2080d User Manual

the CPS. Scramble is disabled when the
value is set to '0'.
PROGRAMMING MAXIMUM NUMBER OF
CHANNELS
You can configure the maximum number of
channels for the radio. Once you have entered
the Advanced Configuration Mode, scroll up or
down through the programming modes by short
pressing the PTT button or
until you reach the 'Maximum Channel
Programming Mode'.
The radio display shows the Maximum Number
of Channels as follows:
MA CH
X
The radio display blinks the current maximum
number of channels programmed. Use the
and
40
English
(Menu) button
buttons until you get the desired
maximum number of channels. Long press the
PTT button to exit and save, or short press the
PTT button to move to the next programming
feature without saving.
Note: The values available for maximum channel
settings are dependent on the maximum
number of channels the radio supports.

PROGRAMMING CALL TONES

Call Tones feature allows you to transmit an
audible tone to other radios on the same
channel to alert them that you are about to talk
or to alert them without speaking.
In 'Call Tone Selection Mode' you can
configure the type of call tone for the radio. The
settings available are dependent on the
maximum number of call tones your radio
supports.
To program Call Tones, enter the Advanced
Configuration Mode and scroll up or down
through the programming modes until your
display radio shows the 'Programming Call