Accessories List; Foot Supporter - OsteoSys SONOST 3000 User Manual

User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000
NOTE !
Use external device which certificated by standard (IEC-60601-1).
NOTE !
Use Accessory which defined at user's manual.

2.1.2 Accessories List

Check the following accessories before installing the system.
If they are not in good condition, contact to OsteoSys or its
authorized dealer for this service.
Names of
Products
User's Manual

Foot supporter

QC Phantom
Power Cable
OT06-2R0423-06
Number
Make sure to keep it at a designated place so that
1
users can read it anytime they need to.
Use them in accordance with patients' foot size.
4
( base, 0, 1, 2, 3(P) )
It is used to calibration the system.
1
It is used to connect to the source of electric power
with the main body of SONOST 3000.
1
１６
DOC. No. : OT06-2R0423-06-MUL
Uses
Keep it in the specified place and protect
it against deformation by heat or
pressure.
Make sure to connect it with a grounded
electric outlet.
A4(210 × 297)