User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000
3.3 Using H/W
3.3.1 Patient Measurement Procedure
NOTE !
Insert patient's foot only if gap between probe's is wide enough, because probe
pad is made from soft silicon.
OT06-2R0423-06
DOC. No. : OT06-2R0423-06-MUL
Clean the surface of the Coupling Pad
with an alcohol pad and apply
sufficient gel to probes.
Clean the both side of patient's
heelwith an alcohol pad and apply gel.
Insert patient's foot.
Let a patient move his foot up to down
just like this picture.
Start measure after insertion and
positioning. Ensure correct Foot
Positioner 1 or 2 is used depending on
patients foot size
29
A4(210 × 297)