Execution Of Program - OsteoSys SONOST 3000 User Manual

User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000

3.4.2 Execution of Program

CAUTION !
If you hear any strange noise from the screen, switch it off and contact to OsteoSys
or its Authorized dealer.
Turn on the power switch.
10 seconds after calibration that checks functions of the system and memory device,
the program is automatically activated and you should configure the incipientenvi-
onment.
This is the start up screen.
There are Main buttons on the top line, It is used when the screen is moved.
The bottom line is consisted of Sub buttons, it is used for sub function.
Other screens are similar formation.
- QuickMeasure : Direct measuring function without patient's registration process.
- DailyTest : Daily test function.
When the daily test is needed, the color of button is red.
When not needed, the color of button is the same as the others.
- Setup : Consists of functions which are related with program setting.
- Information : Display information about the program and device.
OT06-2R0423-06
DOC. No. : OT06-2R0423-06-MUL
Home of the startup screen
３６ A4(210 × 297)