Setup And Sending Function Of Pacs - OsteoSys SONOST 3000 User Manual

User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000

3.4.12 Setup and sending function of PACS

PACS requirements
∙
USB Ethernet Adapter
∙
You should get specification IP, Serve net mask, basic gateway from hospital
network.
∙
PACS server IP and Port (Hospital already get information about PACS server)
∙
Remote A-Title(You should ask to a manager of PACS in hospital)
The method connect to PACS
- Connect of Device
Connect the Ethernet cable to the LAN port on the back of the device.
- Network set up
You can see 'My Network Places' on the screen. Select this item and press the right
side of mouse. You should select "properties"
- Setup of the LAN Card
When you set up LAN card, you should turn on the device.
OT06-2R0423-06
DOC. No. : OT06-2R0423-06-MUL
Ethernet cable
６３ A4(210 × 297)