Execution Of Program - OsteoSys SONOST 3000 User Manual

User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000

3.2.2 Execution of Program

CAUTION !
If you hear any strange noise from the screen, switch it off and contact to
OsteoSys or its Authorized dealer.
 Turn on the power switch.
10 seconds after calibration that checks functions of the system and memory
device, the program is automatically activated and you should configure the
incipient environment.
This is the incipient screen.
There are Main buttons on the top line, It is used when the screen is moved.
The bottom line is consisted of Sub buttons, it is use for sub function.
Other screens are similar formation.
- QuickMeasure : Direct measuring function without patient's registration process.
- DailyTest : D aily test f u nction.
When the daily test is needed, the color of button is red.
After it is need not, the color of button is turn to same with others.
- Setup : C onsists of f u nctions which are related with program setting.
- Information : D isplay information about the program and device.
OT00-2F0423-01
DOC. No. : OT06-2R0422-00-MUL
Home of the incipient screen
２０ A4(210 × 297)