Screen Display Messages - AT&T CL84107 User Manual

Appendix

Screen display messages

Screen messages
Added to
allow list
Added to
block list
Added to
star name list
BASE 0
is calling
Base
Check AC power
Blocked call
Block list
is empty
Call
transferred
Caller ID log
empty
Calling
BASE 0
Calling HANDSET X
Call answered
Contact deleted
Directory empty
Directory full
Ended
HANDSET X
is calling
Incoming call
Intercom
Intercom ended
INTERCOM TO:
Line in use
An entry has been added to the allow list.
An entry has been added to the block list.
An entry has been added to the star name list.
The telephone base is calling.
The base's corded handset is lifted during an AC power failure.
If there is an AC power failure, it is still possible to dial out and
receive incoming calls using the corded handset.
An incoming call is blocked.
There are no call block entries.
You have transferred an outside call to another device.
There are no entries in the caller ID log.
The handset is calling the telephone base (for intercom calls).
The handset or telephone base is calling another handset (for
intercom calls).
The telephone base is transferring an outside call to a handset.
The answering system has answered an incoming call.
A directory entry is deleted.
There are no directory entries.
The directory is full. You cannot save any new entries unless you
delete some current entries.
You have just ended a call.
Another system handset is calling.
There is an incoming call.
The device is on an intercom call.
The intercom call has just ended.
You have started the intercom process, and need to enter the
number of the device you wish to call.
An extension phone, or one of the devices is in use.
129