Table of Contents
Advertisement
depending on the load and configuration. In addition, when one UPS is taken out of service for maintenance or
is not operating properly, a redundant UPS continues to supply uninterrupted power to the critical load. A
Controller Area Network (CAN) Bridge provides connectivity for system metering and operational mode control.
1.2.3 Monitoring and Communication
Mini-Slot Cards – Optional Mini-Slot cards support several protocols, such as WEB/SNMP , RELAY / RS232 and
Modbus. See Chapter 7 , "Communication, " for additional information on monitoring and communication
features.
1.3
Battery System
The internal battery system (Number of batteries depends on UPS model) provides emergency short-term
backup power to safeguard operation during brownouts, blackouts, and other power interruptions. The battery
system is equipped with lead-acid batteries.
1.4
Basic System Configurations
The following basic UPS system configurations are possible (model dependent):
•
Single UPS (internal battery selectable from 0-6 strings, each strings consists of 36 blocks of 9AH batteries).
The UPS system configuration can be enhanced by adding optional accessories such as a
Remote Emergency Power-off (REPO) control or Mini-Slot communication cards.
1.5
Using This Manual
This manual describes how to install and operate the Eaton 93E XL 10-40 kVA. Read and understand
the procedures described in this manual to ensure trouble-free installation and operation. In particular,
be thoroughly familiar with the REPO procedure (see paragraph 6.3.13).
The information in this manual is divided into sections and chapters. The system, options, and accessories
being installed dictate which parts of this manual should be read. At a minimum, Chapters 1 through 4
and Chapter 6 should be examined.
Read through each procedure before beginning the procedure. Perform only those procedures that apply to
the UPS system being installed or operated.
1.6
Conventions Used in This Manual
This manual uses these type conventions:
•
Bold type highlights important concepts in discussions, key terms in procedures, and menu options, or
represents a command or option that you type or enter at a prompt.
•
Italic type highlights notes and new terms where they are defined.
•
Screen type represents information that appears on the screen or LCD.
Icon
Note Information notes call attention to important features or instructions.
[Keys] Brackets are used when referring to a specific key, such as [Enter] and or [Ctrl].
In this manual, the term UPS refers only to the UPS cabinet and its internal elements. The term UPS system
refers to the entire power protection system – the UPS cabinet, an external battery system, and options or
accessories installed.
3
Eaton 93E XL UPS (10-40kVA, 380/400/415V) Installation and Operation
Description
Advertisement
Table of Contents
