HP ProLiant DL80 Gen9 Maintenance And Service Manual page 64

Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Remove the air baffle
5.
CAUTION: The fan does not have a fan guard. Special attention is needed when removing or
installing the fan to prevent finger injury.
Remove the fan from fan bay 6.
6.
Disconnect the front I/O assembly cable.
7.
("Access panel" on page 35).
("Air baffle" on page 36).
Removal and replacement procedures 64