Deck Adjustment - Samsung VP-L900 Training Manual

Alignment and Adjustments

5-6 DECK Adjustment

5-6-1 Operation Without Housing Assembly
1. Remove the Housing Ass'y from the recorder unit.
2. Connect the mechanical chassis to the recorder cir-
cuit to supply voltage.
3. Set to Unload mode.
4. Press the S/W Push (Keep ON status) and make
loading.
5-6-2 Setting Mechanical Mode (Without Recorder Circuit)
1. Set the power-supply output to approx. 3V.
2. Choose the polarity (depending on whether loading
or unloading).
3. Supply the voltage to the Motor Loading, and set to
the desired mode.
5-18
CONNECTED TO THE
RECORDER CIRCUIT
5. Push the Play key.
Note : For the removals of the Housing Ass'y,
refer to 4-2-2(page4-7).
S/W PUSH
Fig. 5-22
Drum side
+
–
Fig. 5-23
Table 5-9
Opposite side Movement of Chassis
– Loading
+ Unloading
Samsung Electronics