4-2-8 Arm Tension
4-2-8 (A) Disassembly
1. Push the Arm Tension Ass'y ´ (arrow "A") and
then remove the Spring Tension Œ .
2. Push the Arm Tension Ass'y ´ (arrow "A") to the
end, and then lift it (reverse of arrow "A").
Samsung Electronics
ˇ SPRING HOOK
Œ SPRING TENSION
A
¨ SPRING HOOK
4-2-8 (B) Reassembly
1. Insert the Pin Arm Tension ˆ into the Sub-Deck
Guide Hole Ø .
2. Push the Arm Tension Ass'y ´ (arrow "A") and
install it.
3. Insert the Spring Tension Œ into the Spring Hook
¨ .
´ ARM TENSION ASS'Y
ˆ PIN ARM TENSION
Fig. 4-17 Arm Tension
Disassembly and Reassembly
Ø SUB DECK GUIDE HOLE
∏ BUSH
4-13