2) Tracking Adjustment
1. Play back the alignment tape. (Tracking B or C)
2. Turn P2 to flatten the waveform at the inlet.
3. Turn P5 to flatten the waveform at the outlet.
P5
Samsung Electronics
P2
Fig. 5-31
3) Not Adjustment
1. Play back the alignment tape, and confirm that the
tape is not loosened between the Capstan Motor
and Cuide Roller T.
2. Set to REV mode and observe the outlet waveform
of PB RF signal. (Fig. 5-33)
P7 CAPSTAN
TAPE SHOULD NOT BE
LOOSENED HERE
(NG)
Alignment and Adjustments
GUIDE ROLLER T (P5)
GUIDE
ROLLER S
(P2)
Fig. 5-32
(GOOD)
Fig. 5-33
5-25