Punch Unit - Olivetti ZU-603 Service Manual

2. Other
2.3.6

Punch unit

1. Remove the Z folding unit.
See P.13
2. Remove the rear cover.
See P.10
3. Remove the right cover.
See P.11
[3]
[2]
7. To reinstall, reverse the order of removal.
16
[1]
A07TF2C004DA
[1]
A07TF2C005DA
[2]
[1]
A07TF2C006DA
Service Manual
Field Service Ver. 2.0 May 2008
4. Pull out the Z folding/conveyance
unit [1].
5. Cut the wiring harness band [1], and
disconnect two connectors [2].
NOTE
• When bind the wiring harness band
[1], be sure to bind it so that the wir-
ing harness [3] passes the wiring
harness band [1] from left to right
from the view of the rear.
• Be sure to bind the wiring harness
band [1] with sufficient length of the
wiring harness [3] when the punch
unit move to forward.
6. Remove four screws [1], and remove
the punch unit [2].
Y107910-0