Main Motor Cooling Fan (Fm1) - Olivetti ZU-603 Service Manual

2. Other
[2]
6. To reinstall, reverse the order of removal.
2.3.14

Main motor cooling fan (FM1)

1. Remove the Z folding unit.
See P.13
2. Remove the rear cover.
See P.10
3. Remove the upper cover.
See P.11
[2]
[1]
[1]
6. To reinstall, reverse the order of removal.
26
[4]
[3]
[1]
A07TF2C512DA
[4] [2]
[3]
A07TF2C025DA
[2]
A07TF2C026DA
Service Manual
Field Service Ver. 2.0 May 2008
5. Remove the C-clip [1], and remove
the punch clutch [2].
NOTE
• When reinstalling punch clutch [2],
be sure to check the stopper [3] is
engaged with a projection [4] of
metal plate.
4. Disconnect the connector [1], and
remove four screws [2], and remove
the harness from wire saddle [3],
and remove the main motor cooling
fan assy [4].
5. Remove two screws [1], and remove
the main motor cooling fan [2].
Y107910-0