Panel Cutout - Signet 8150 Manual

3.5 Remote Field mount on Pipe
The parts identi¿ ed in Bold type are required for this installation.
Other parts are shown for reference only.
Use 2-conductor shielded cable no more than 30 m (100 ft.) long.
Standard Mount
Paddlewheel
(P51530)
Signet
Fittings
3.7 Panel Mount Installation Detail
• The 8150-1P Panel-mount Totalizer is a standard ¼ DIN package. Use a 92 x 92 mm punch tool to make the panel cutout.
• Minimum spacing of 25 mm (1 in) between panel units is recommended.
9 2 x 9
( 3 . 6 2

Panel cutout

8150 Flow Totalizer
Flow
Totalizer
(3-8150-1)
Universal
Mounting Kit
(3-8050)
NOTE: Pipe straps
not included
2 m m
x 3 . 6 2
i n . )
3.6 Remote Installation with Panel Mount Totalizer
The parts identi¿ ed in Bold type are required for this installation.
Other parts are shown for reference only.
Standard Mount
Paddlewheel
(P51530)
Signet
Fittings
panel
gasket
latch
Panel Mount
Installation Detail
Totalizer
Panel Mount
(3-8150-1P)
mounting
bracket
terminals
quick-clips
3