Signet 8150 Manual page 12

12. Timebase
Select the timebase for the À ow rate. The available selections are seconds, minutes, hours or days.
Example: Change the Timebase from MINUTES (factory standard) to DAYS
1. Hold the ENTER key for 2 seconds, then enter the SECURITY CODE.
The display shows the ¿ rst item in the CALIBRATE menu, AutoCAL.
2. Press the DOWN key three times to scroll to the Timebase.
3. Press the RIGHT key to select the Timebase for editing.
4. Press the UP key two time to scroll from MIN to DAY.
5. Press the ENTER key to return to the menu.
6. Press UP and DOWN keys together to exit the menu and return to normal operation.
The display shows "Storing" for a few seconds, then returns to the normal operating display.
1
3
6
**
Exit Without Changing?
*
As long as any element is À ashing, you can abort
the change and return to the original value by
pressing UP and DOWN keys simultaneously.
12
ENTER
2 s
Enter security code
4
*
ENTER
2x
Finished Editing?
**
Press the UP and DOWN keys
simultaneously from the main menu to
return to normal operation.
2
**
3x
5
*
ENTER
8150 Flow Totalizer