Cubicon Style 3DP-210F Quick Start Manual page 14

④ Please select the file for printing after inserting SD card.
Press [OK]button to bring function menu on LCD screen
and then press {SD Card} to see the list of all G-Code
file(*.hvs)
Please choose the respective filament type.
ABS  "ABS_*.hvs" file
PLA  "PLA_*.hvs" file
Only file with extension name of *.hvs can be allowed for
printing.
Enclosed SD Card include some sample files of small
objects with least printing time in G-Code(*.hvs)
⑤ Elevate the temperature in sequence, to the level
required by G-Code files, starting from heated bed,
then to extruder nozzle, and then auto Leveling
process can begin.
Now it has been a pleasure to go through quick guide for installation and sample printing process!!!
It is strongly recommended that you read our latest instruction manual enclosed in SD Card or
downloadable from our homepage (www.3dcubicon.com) in order to well maintain the printer for high
quality printing work.
However, we would like to inform you that there are commonly witnessed issues specifically for
FFF(FDM) type of 3D printer in which it is required to melt the filament, which tend to make it more
susceptible to such damages as deformation, breakage, bending of the printed object due to the
shrinkage of the filament by nature itself. Also, printed quality can be impacted by color, type of
filament, conditions of printing, model type of the printed object and so on. Thus, it takes some various
experiences to optimize your printing quality.
Cubicon Style and accompanying slicing program, Cubicreator can provide various users with best
quality printing experiences.
After installing Cubicreator, choose Cubicon Style (3DP-210F) for setup.
Once Again Thank you for purchasing Cubicon Style.
Copyright Reserved HyVISION System Inc.
This document is Quick Start Guide (151001,En). To improve quality of product, this could be revised without
prior notification or consent.
HyVISION System is not liable for any losses resulted from the use of the document or any errors or offering.
Print for the first time (2/2)
⑥
After completion of the printing job, do not
remove the printed object with excessive force,
just wait until heated bed cools down to
ambient temperature level at which it is easier
to remove them.
If printed object does not get removed after
temperature cools down, try to widen space
with flat objects a little by little between bottom
edge of the object and bed.
14