Table of Contents
Advertisement
Emergency
Stop
LCD screen & Menu button.
2
[1] LCD
It shows the current status of printer or menu.
Menu's position moving.
[2] UP
Menu's position moving.
[3] DOWN
Menu's selection.
[4] OK
[5] BACK
Go back to previous menu.
[6] HOME
Go to Home Menu.
LCD – Current state of printer.
Current state of the printer is normally displayed.
1
3
5
6
[1] Nozzle temperatures.
[2] Temperature of heated bed.
[3] Temperature inside printer.
[4] Cooling Fan RPM
[5] Selected file name
[6] Printer operation status.
Copyright Reserved HyVISION System Inc.
This document is Quick Start Guide (151001,En). To improve quality of product, this could be revised without
prior notification or consent.
HyVISION System is not liable for any losses resulted from the use of the document or any errors or offering.
Operation and LCD Screen Information
When there is an error occurred when operating the printer, you can stop
immediately by pressing power-off button located on bottom right corner.
1
5
4
3
Current temperature/target temperature
Current temperature/target temperature
Current temperature/target temperature
FAN RPM (Max 100%)
Name of the selected file from SD Card.
Current status of printer.
When it is being printed, it displays duration of printing (hh:mm), progress
[time left]".
6
2
4
12
Advertisement
Table of Contents
