Description Of Symbols; Caring For The Environment; Spare Parts; General Maintenance - Ozito OZCCS85WA Instruction Manual

5. MAINTENANCE

General maintenance

Keep the Sharpener clean and free of dust, metal debris and dirt.
Check the sharpening wheel before each use to make sure it isn't
damaged. Do not use a sharpening wheel if it is chipped, cracked, or
worn. You can check if the wheel has cracks not visible to the human
eye by hanging it up by the central hole and tapping it with a non metal
object (ie. screwdriver handle). If it is in good condition it will produce
a metallic sound. A dull sound indicates a crack or break.
Replace the sharpening wheel when it grinds down to a diameter
of 3 inches.
Filing the chain depth
If the chain has been
repeatedly sharpened,
the chain depth limiting
gauges (depth gauge)
may need to be filed
down with a flat file (not
included).
The depth of the depth
gauges should be NO
more than 0.5mm below
the cutters.
Always disconnect the sharpener from the power supply prior to
making any adjustments or performing any maintenance.
Ensure replacement wheels are rated at 4,800/min or higher. Using a
wheel rated below the speed of the sharpener is a hazard.
Periodically check that all nuts, bolts and other fixings are properly
tightened.
Note: Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised person or
mishandling or mistreatment of the tool. This tool is designed for
DIY use - use in commercial or industrial environments will void the
warranty
CUTTERS
DEPTH GUAGE

DESCRIPTION OF SYMBOLS

V Volts
~ Alternating current
Revolutions or
/min
reciprocation per minute
Regulator compliance
mark
Warning

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.

SPARE PARTS

Limited spare parts are available subject to availability.
Please contact your local Bunnings Special Orders Desk to
order the required spare parts.
Most common spare parts listed below
Spare Part Part No.
Sharpening Wheel ACC-CCSW1 (accessory)
Chain Stop SPOZCCS85WA-23
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au
Hz Hertz
W Watts
n
No load speed
o
Double insulated
Read instruction manual