Taking The Bracelet Part; Determining How Many Links To Remove - iwc IW3777 Operating Instructions Manual

— 3 3 —
T A K I N G T H E B R A C E L E T A P A R T
Open the folding clasp by pressing the buttons on the side. Lay
the bracelet face down on a firm base. To avoid scratching the
bracelet and base, place a cloth underneath the bracelet. Using
the special tool provided, you can now push down the fixing bolt
at the desired point of separation and at the same time, slide the
bracelet link outwards (1). Now slide the opposing external brace-
let link away from the bracelet with both the hinged links, without
pushing down its fixing bolt (2). The bracelet is now separated (3).
D E T E R M I N I N G H O W M A N Y L I N K S T O R E M O V E
Place the watch around your wrist with the folding clasp closed,
and use the overlap to estimate the number of surplus bracelet
links you can now remove as described below. If you need to
shorten the bracelet by several links, we recommend removing
the same number of links from each half of the bracelet if pos-
sible, to ensure that the clasp can be worn more or less in the
centre of the wrist.
P I L O T ' S W A T C H C H R O N O G R A P H