Connect Your Network Devices - Technicolor DWA0120 Quick Setup Manual

4. Power on your DWA0120
1 Plug the connector of the electric power supply adapter into the DWA0120 power
inlet port (
2 Press the power button (
If the LED is blinking green or orange, the DWA0120 is updating its
software. If this is the case, wait until the LED becomes solid on. This can
take several minutes! Do not power off your device or unplug any cables!

5. Connect your network devices

We recommend you to first connect one computer/tablet (if possible via a wired
connection), then complete the rest of the procedure and as a final step connect the
other (wired and/or wireless) devices.
5.1. Connect your wired (Ethernet) devices
). Plug the adapter into a nearby power outlet.
) on the back panel.
3