Back Panel - RGBlink RMS 8424S User Manual

1.2.1 Back Panel

Input Connectors
DVI-I – DVI
Standard DVI signals can input. Additionally this DVI port supports VGA with the use of
4
a DVI to VGA adapter.
The DVI port supports up to HDMI 1.3 if the port format is set to HDMI.
BNC – 3G-SDI
6
Standard 3G-SDI signals can input.
BNC-CVBS
8
Standard CVBS signals can input.
Output Connectors
DVI-I – DVI LOOP
3
Connect to the DVI input of the next RMS 8424S or the device with DVI input.
BNC – 3G-SDI LOOP
5
Connect to the SDI input of the next RMS 8424S or the device with SDI input.
BNC – CVBS LOOP
9 Connect to the CVBS input of the next RMS 8424S or the device with CVBS input.
Note: it is valid only when switch the signal to AV channel.
Control Connectors
TALLY
TALLY control port (RS-232). The electrical level is as follows:
Electrical level: ≤5V
2
RMS 8424S
Voltage
≤0.5V
≥1.3V
User Manual
Chapter 1: Your Product
Tally light condition
ON
OFF