Soft Counter; Meap Counter - Canon imagerunner advance 6255 Service Manual

S. Soft Counter
The imageRUNNER ADVANCE 6200 Series uses soft counters to track its
functional copy use. The control panel can display up to eight (8) counters on
the counter status check screen (when the counter check key button on the
control panel is pressed). By default, the imageRUNNER ADVANCE 6200
Series displays six (6) counters on the counter status check screen.
The Table below indicates the default counter configurations of the
imageRUNNER ADVANCE 6200 Series on the counter status check screen.
Refer to the imageRUNNER ADVANCE 6275/6265/6255 Series Service Manual
for complete details on the Soft Counter configurations.
Table 34 – Soft Counter Configuration
Counter
1
2
3
4
5
6
T. MEAP Counter
The MEAP application counter counts the number of prints and scans made per
MEAP application. You can view the MEAP counter by logging on to the MEAP
SMS (Service Management Service) Application/License Information page via a
Web browser. (The computer you are using must be connected to the machine
and network.) You can also view the MEAP counter from the MEAP device.
Press the Counter Check button on the device's control panel, and then press
the MEAP Counter key on the touch panel display.
There are three types of MEAP applications:

Applet:
Up to nine applet tabs can be displayed on the touch panel display of the
device.

Servlet: Contains a remote, programmable user interface for the
application via a Web browser.

Esplet:
Each MEAP application has its own counter. There are 20 counters available for
MEAP applications on the imageRUNNER ADVANCE 6200 Series machines.
However, one of these 20 counters is used for Universal Send.
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
Counter Description
(from Service Manual)
101: Total 1
103: Total (Large)
201: Copy (Total 1)
203: Copy (Large)
Not Displayed
Not Displayed
Contains a user interface on the touch panel display of the device.
The application does not contain a user interface.
imageRUNNER ADVANCE 6200 Series Service Guide
Default
Adjustability of Display
Display
May be Swapped to different Total
On
Counter via Service Mode setting
On
On
May be Changed via Service Mode
On
setting to any available counter
Off
Off
December 2013
Page 68