Soft Counter; Soft Counter (Table 22) - Canon imagerunner advance C9065S PRO Service Manual

Canon
Q. Soft Counter
The imageRUNNER ADVANCE C9000S PRO Series uses soft counters to
track its functional copy use. The operator panel can display up to eight (8)
counters in the Maintenance Mode (when the Maintenance button on the
operator panel is pressed). The imageRUNNER ADVANCE C9000S PRO
Series operator panel displays up to eight (8) counters on the Maintenance
Mode screen.
The Maintenance Mode screen shows two types of counters; Billing counters
and Day counters. Billing counters represent the total number of prints that
have been made since the machine was installed. The Day counters displays
the same counters, however, the day counters can be reset to zero (0). The
Day counters can be reset at any time (i.e., between jobs, daily or between
meter readings).
The table below indicates the default counter configurations of the
imageRUNNER ADVANCE C9000S PRO Series in maintenance mode. Refer
to the imageRUNNER ADVANCE C9075S PRO/C9065S PRO Series Service
Manual for complete details on the Soft Counter configurations.

Soft Counter (Table 22)

Counter
Number
1
2
3
4
5
6
7
Displayed
8
Displayed
The default counter 3 (meter 229) and counter 4 (meter 230) do not increment
when a copy is made. Canon USA recommends changing these counters
during installation to what is most appropriate to your service organization.
When changing any of the counters, the PRISMAsync Controller and the
Main engine must be rebooted for the changes to take effect.
Refer to the imageRUNNER ADVANCE C9000S PRO Series Service Manual
for complete details on the Soft Counter configurations.
CAUTION
After performing a RAM clear, the counter will change back to its default. As a
result, the service technician must note the soft counter settings before
performing the RAM clear and return the soft counter settings after the RAM
clear has been performed.
imageRUNNER ADVANCE C9000S PRO Series Service Guide
Revision 2
imageRUNNER ADVANCE C9000S PRO Series Service Guide
Meter Counter Description
(from Service Manual)
101
108 Total (B&W 1)
229 Copy (Full Color + Single Color/Large)
230 Copy (Full Color + Single Color/Small)
321 Print (Full Color + Single Color/Large)
322 Print (Full Color + Single Color/Small)
Not
Not Displayed
Not
Not Displayed
Total 1
Default Adjustability of
Display Display
On May not be changed
On
On
On
May be changed via
On
Service Mode setting to
On
any available counter
Off
Off
March 2015
Page 45