Canon imagerunner advance 6255 Service Manual page 71

Table 33 – Main Unit Periodic Maintenance Continued
Part Name
♦:Replacement (Periodical replacement) ●: Replacement (Consumable parts)
Primary Charging
Assembly Shield Plate
Pre-transfer Charging
Assembly Shield Plate
Toner collection area
Separation Claw
Mounting Base
Process Unit Rear Guide
Drum Sliding Assembly
Drum Surface
Drum Edge
Lower side of Developing
Assembly
Developing wheel
Lower side of Cylinder.
Toner Receptacle Tray
Waste Toner Container
ETB
Transfer Roller
Brush Roller
ETB Cleaning Blade
ETB Driver Roller
ETB Idler Roller
Fixing Web
55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customer
handling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
Main Unit Periodic Maintenance
Estimated Interval
120,000 500,000 600,000 1,000,000 6,000,000
Δ: Cleaning ×: Lubrication
Δ
Δ
Δ
Δ
Δ
Δ
Δ
Δ
Δ
Δ
●
●
●
●
Δ
Δ
●
imageRUNNER ADVANCE 6200 Series Service Guide
55
As
needed
×
Δ
Δ
Remarks
Clean with lint-free paper
moistened with water.
Crumb toner clusters.
Clean with lint-free paper
moistened with alcohol.
Apply lubricant at the Drum
Sliding Assembly when
abnormal sound is heard during
operation.
Using lint-free paper, clean the
drum with the drum cleaning
powder
Clean with lint-free paper
moistened
In a high temperature/humidity
environment (30 deg C/80%),
replace at 250,000 sheets.
Remove toner scattered during
the removal of the Developing
Assembly.
Clean with lint-free paper
moistened with alcohol.
Remove toner on the tray.
Clean when the message is
displayed.
Clean with lint-free paper
moistened with alcohol.
December 2013
Page 65