Account Registration - Lennox 11U61 Setup And Installation Manual

Icomfort wi-fi flex, touchscreen programmable thermostat
Hide thumbs Also See for 11U61:
Table of Contents

Advertisement

User Account Registration for Lennox Server
Access
Figure 13. Registration Screen
NOTE - This following information is customer set
up instructions and is shown here to allow the
installer to help walk the customer through the set
up process.
After registering through your iComfort Wi‐Fi
thermostat interface, go to the homeowner's computer
and locate the email sent from the server.
507428-01
NOTE - if the customer has already set up an
account, click the "Click Here" button to access that
account.
Click on the Register link; the screen (to the left) will
appear. Fill in the User Name and Password fields and
check the agree to terms and conditions box. Click
Create User button.
A series of pages and prompts follows to provide
guidance through profile set up and user preference
definitions.
USER NAME REQUIREMENT
The following are the minimum user name requirements:
User name must begin with a letter.
User name has a minimum of four and a maximum
of 37 characters.
User name is not case sensitive.
User name cannot be a email address
User name must be unique. If user name used is
already in use, a message indicating so will appear.
PASSWORD REQUIREMENT
The following are the password requirements:
Upper and lower case combinations are allowed.
®
Flex
At least one number must be used.
Minimum of six characters.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents