Lennox 11U61 Setup And Installation Manual page 7

3. The User Agreement screens will appear next.
Press next as many times as necessary; then press
accept after reading the User Agreement.
ESTABLISHING A WI-FI CONNECTION
There are two methods to set up your Wi-Fi connection.
Select either NETWORK SETTINGS or connection
status.
Method 1 — Network Settings Method
1. Press NETWORK SETTINGS; this screen shows a
graphical view of buttons representing OPEN and
SECURE Wi-Fi networks and a button for adding a
network.
WI-FI SETTINGS
Thermostat is not connected to the Wi-FI network
connection
status
Press to see
connection status
Must setup a network connection before registering thermostat
Figure 6. Enable Wi-FI
• Open connection which which requires no
password.
• Secure connection which requires Wi-Fi
password (security key).
WI-FI
NETWORK
SETTINGS
enabled
press to change
press to enable /
network settings
disable Wi-FI
• Add a network is required when Wi-Fi
identification (SSID) is being hidden (not
broadcasting). You will need to know the Wi-Fi
network name (SSID), security encryption type
(if enabled), and security password (if security
encryption is enabled).
2. When selecting a:
• unsecured connection a screen will appear with
two options, connect and router info. Press
connect to continue.
• secured connection a screen will appear
requesting
(security key). There are two options to select
from which are connect and router info. Using
the on-screen keyboard, enter the password
X
(security key) and then press connect to
continue.
HOME
Open connection (no password required)
DS9A
Secure connection (password required)
(lock icon is present)
Figure 7. Typical Connection Type and Signal
7-Day Programmable iComfort Wi‐Fi
7
the Wi-Fi network
Strength
®
Flex Thermostat
password