Skins; Screen-Saver - Lennox 11U61 Setup And Installation Manual

1. From the Home screen, press the
Features button.
2. Select Display Settings
3. Select outdoor temp display.
Options are off, internet and
sensor.
indoor temperature set temp
75
cool-to
70
heat to
indoor humidity is 41%
system is cooling
Wi-Fi 9:39 am Aug 15, 2012
From the web portal welcome page, you may also click
on links to launch an interactive demo or learn more
about iComfort.

Skins

By adding a skin and matching skin image screen-saver
to your iComfort Wi-Fi, you can coordinate it with the
decor in any room. Skins are available in many colors,
patterns and designs.
Skins can be ordered from nuvango.com
Outdoor
temperature
outdoor
temperature
enter
80
away
heat
or
cool
fan is
AUTO
forecast
touch to go
Hi 85
to Features
Lo 60
use arrows
to change
temperature
fan is
OFF
?
Go to Shop > All Products and scroll down to
EVERYTHING ELSE and select LENNOX
After ordering the skin, the company will email the image
file (.jpg) to you. The frame skin will be mailed to you as
well. The skin image can be uploaded to the iComfort
Wi-Fi thermostat from the consumer portal site
(www.myicomfort.com) under the tab "skins".

Screen-Saver

You can also customize the screen-saver by uploading
your own photo on
tab "skins". Image must be 800x480 DPI in JPG format.
HOW DO I TURN ON SCREEN-SAVER
1. From the thermostat Home screen, press
2. Press the display setting button.
3. Press the screen saver button.
4. From the pop-up menu, select either on for the
default screen-saver or skins for your custom
uploaded image. The skin picture will appear after 30
seconds of inactivity.
• When set to off, the screen stays on.
• When set to on, after 30 seconds of inactivity
the screen will go blank
• When set to skins and no skin or custom image
has been uploaded, the screen will display
7-Day Programmable iComfort Wi‐Fi
23
ICOMFORT
www.myicomfort.com under the
·
.
®
Flex Thermostat