Lennox 11U61 Setup And Installation Manual page 25

ADJUSTING EQUIPMENT PARAMETERS AFTER
INITIAL INSTALLER SET UP
1. From the Home Screen, touch and hold Lennox
until the warning screen appears. Press yes to
continue.
2. Press equipment to change equipment parameters
and edit details of devices in the system without
having to re-run the set up program.
3. Select the equipment button to continue. The
system devices screen will open. Use the arrows to
select a device and touch edit.
4. Use the arrows to highlight a setting and then touch
edit.
5. When finished, touch back; equipment parameters
screen then touch next. "Select tests to run screen
appears"; either run tests as before or touch skip
tests.
7-Day Programmable iComfort Wi‐Fi
25
®
Flex Thermostat