Bios Setup Program; Entering Bios Setup - Advantech PPC-MB-8260AE Startup Manual

BIOS Setup Program

1.1 Entering BIOS Setup

When the power is turned on, press the <Del> button to
enter the BIOS setup screen.
After a setting is configured, press <F4> to save and exit;
otherwise, the configuration will not be saved in the BIOS.
1.2 COM 2 Mode Selection (RS232/422/
RS485)
1. Access the "Super IO Configuration" item from the
"Advanced" tab.
2. Select "Serial Port 2 Configuration". The COM 2 mode
can be configured via the "Device Mode" item.
6 PPC-MB-8260AE Startup Manual
BIOS Setup Program (Cont.)
3. Select the "RS485" option. Autoflow and termination
resistors can be enabled or disabled.
1.3 H/W Monitor and Smart Fan Mode
Configuration
1. Access the "H/W Monitor" item from the "Advanced"
tab to check the voltage temperature and fan speed.
1.4 LAN PXE Mode Selection
1. Access the "Network Stack Configuration" item from
the "Advanced" tab.