Transmission/Reception Mode Options - Konica Minolta 7145 Internet Fax / Fax Operations

Transmission/Reception Mode Options

These are the options on the initial values of transmission and reception modes.
• Transmission mode:
• Reception output mode
• 2 in 1 print:
• Tray selection for Rx
• Shifting to power save:
• Inch paper priority:
• Rx Paper selection
• Reduction for record
• Page divided print
• Rx feed tray (fix)
Quick Tx / Memory Tx *
This parameter determines the initial value of transmission
mode.
*1
: After all * / Every page
This parameter determines the timing at which the document
received should be printed out. If you select "On receiving all
pages", printout will be produced after all pages are received. If
"On receiving every page" is selected, printout will be produced
page by page.
OFF* / ON
When ON is selected, each pair of pages of the original docu-
ment will be printed on a page in the form of 2-in-1.
*2
: Tray1 / Tray2 / Tray3 /Tray4*
Determines the paper tray of printouts.
Normal * / Immediate (1 minute)
Suppose you have selected "Immediate (1 minute)" for your FK-
102 Type-A and it is in power save mode when input signals
come. Then your FK-102 Type-A will resume power save mode
"immediately (in 1 minute)" after completion of reception.
ON / OFF*
By setting "ON", the unit gives Paper choices priority to the size
in inch.
*3
: Automatic * / A4 priority / A4 fix / B4 priority / B4 fix / A3 priority
/ A3 fix
If a "priority" size is specified, paper size will be selected with
priority given to that size. If "Automatic" is selected, the paper
size that is the closest to the original size will be taken.
If a "fixed" size is specified, only the specified size will be used
but not any other.
*4
: 96% */ 95% / 94% / 93% / 92%/ 91%/ 90%/ 89%/ 88%/ 87%/
100%
This parameter determines the rate of reduction in size in repro-
ducing the document image.
*5
: OFF* / ON
When ON is selected and your FK-102 Type-A receives a page
longer than the fixed size, it will be divided into more than one
page.
*2
: Automatic* / Tray 1 / Tray 2 / Tray 3 / Tray 4 / LCT
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender Information/
Reception Time
Line Parameter
Set
Transmission/Reception
Mode Options
PBX (Private Branch Exchange)
Connection Mode Options
Report Output
Set
Initializing the FAX
Image Memory
Function Set
Setting a Special
Parameter
Setting the Internet
Fax Functions
14-25