D Display, Overlays; Display; Aerial View - Furuno TZT9 Operator's Manual

3.

3D DISPLAY, OVERLAYS

3.1 3D Display
The 3D display has native 3D chart design that allows full time 3D presentation. This
true 3D environment gives you all of the information you require with no restrictions on
the information you can see. You can plan your routes, enter points, etc. like on the
2D chart.
The 3D display provides a 3D view of land and sea around your ship. The 3D display
has most of the same information as the 2D display. With both presentations available
you can see the conditions around your ship from different angles. The 3D display
helps you navigate when you are in waters that you do not know. Also, most functions
of the 2D display, for example, destination setting, are available in the 3D display.
For best results make sure you have accurate position and heading data.
3.1.1

Aerial view

The aerial view is the view you get when you activate the 3D display. Your position is
above and behind your ship, and your view is in the forward direction. The illustration
shown below provides an example of how you can change the orientation of the aerial
view display. This illustration shows the view from starboard side of the ship.
Point
Boat icon (your ship)
3D display, aerial view
3-1