Chart Object Information - Furuno TZT9 Operator's Manual

2. CHART PLOTTER
3. Select the 2nd location. A dashed line runs between the start location and the 2nd
location. The range and bearing to the 2nd location are shown.
Starting location
4. Select [Cancel Ruler] at the top right-hand corner of the screen to erase the indi-
cation.
From your ship to a location
1. Select the location then the pop-up menu appears.
2. Select [Dist. to Boat]. A dashed line runs between the boat icon and the selected
location. The range, bearing and the time to go to the selected location are shown.
3. Select [Cancel Ruler] at the top right-hand corner of the screen to erase the indi-
cation.
2.7

Chart Object Information

Vector charts show many objects, like buoys and lighthouses, for which you can find
the information. Port, tide and current information are available if the chart contains
this information.
Select any chart object to find the information.
2-6
Your ship
S57 Object Info
By, special purpose
Shape
Category
Separation Scheme)
Color
Puget Sound Traffic Lane
Name
Separation Lighted Buoy T
Source date
8.765NM 8.765NM
Range and bearing from starting
76.4°M 76.4°M
location to the 2nd location
M: Magnetic
2nd location
11.38NM 11.38NM
56.6°M 56.6°M
Range, bearing and
1h23' 1h23'
time to go to point
M: Magnetic
pillar
TSS mark (Traffic
yellow
10/10/2012