How To Adjust The Brilliance Of The Display And Panel - Furuno GP-170 Operator's Manual

1. OPERATIONAL OVERVIEW
2D positioning
GP-D2D
GP-D2D (Yellow)
GP-D2D! (Yellow)
GA-2D
GA-S2D
GA-D2D
GA-D2D (Yellow)
GA-D2D! (Yellow)
GL-2D
GL-S2D
GL-D2D
GL-D2D (Yellow)
GL-D2D! (Yellow)
GN-2D
GN-S2D
GN-D2D
GN-D2D (Yellow)
GN-D2D! (Yellow)
No Fix
2D positioning: Three satellites are used.
3D positioning: More than four satellites are used.
Note 1: GLONASS, GALILEO and Multi are reserved for future use.
Note 2: The screen refreshes slower in low ambient temperature.
To turn the power off, press the
1.3 How to Adjust the Brilliance of the Display and
Panel
1. Press the BRILL key to show the following setting window.
2. To adjust the display brilliance, use the cursorpad (
ting range: 0 to 15, default: 14 for day mode/6 for night mode).
3. To adjust the panel brilliance, use the cursorpad (
default: 7 for day and night modes).
4. Press the MENU/ESC key to close the setting window.
1-4
Indication
3D positioning
GP-D3D
GP-D3D (Yellow)
GP-D3D! (Yellow)
GA-3D
GA-S3D
GA-D3D
GA-D3D (Yellow)
GA-D3D! (Yellow)
GL-3D
GL-S3D
GL-D3D
GL-D3D (Yellow)
GL-D3D! (Yellow)
GN-3D
GN-S3D
GN-D3D
GN-D3D (Yellow)
GN-D3D! (Yellow)
key.
System
GPS + Differential
GPS + Differential (WER>10%)
GPS + Differential (Unmonitored)
GALILEO
GALILEO + SBAS
GALILEO + Differential
GALILEO + Differential (WER>10%)
GALILEO + Differential (Unmonitored)
GLONASS
GLONASS + SBAS
GLONASS + Differential
GLONASS + Differential (WER>10%)
GLONASS + Differential (Unmonitored)
Multi
Multi + SBAS
Multi + Differential
Multi + Differential (WER>10%)
Multi + Differential (Unmonitored)
No fixed
Switch the color mode between
day mode and night mode.
Long-press to restore the
settings to default of day mode.
or ) or the BRILL key (set-
or ) (setting range: 0 to 9,