Tspl - Printronix T600 Administrator's Manual

6.3 TSPL

This "TSPL" category can set up the printer settings for TSPL.
Menu
Item
Speed
Density
Direction
Print mode
TSPL
Description
Use this item to setup print speed.
Use this option to setup printing darkness. The available setting is from 0
to 15, and the step is 1. You may need to adjust your density based on
selected media.
The direction setting value is either 1 or 0. Use this item to setup the
printout direction.
DIRECTION 0
This item is used to set the print mode. There are 5 modes as below,
Printer Mode Description
None Next label top of form is aligned to the print head burn
line location. (Tear Off Mode)
Batch Mode Once image is printed completely, label gap/black
mark will be fed to the tear plate location for tear away.
Speed
Density
Direction Batch Mode
Print mode Peeler Mode
Offset Cutter Mode
Shift X Cutter Batch
Shift Y
Reference X
Reference Y
Code Page
Country
DIRECTION 1
- 40
None
P180043-001_A
Default
5 (203dpi)
3 (300dpi)
8
0
Batch
Mode