Tait TM8200 Installation And Operation Manual page 13

Figure 1.3 The Contents window of the product support CD
Install Applications
View Documents
13 General Information
The upper two buttons in the Contents window of the product support
CD allow for the installation of the programming and calibration
applications:
Click the "Programming" button. Installation of the programming
1.
application begins automatically. Follow the instructions on the
screen to complete the installation.
Click the "Calibration" button. Installation of the calibration
2.
application begins automatically. Follow the instructions on the
screen to complete the installation.
The Contents window remains open following installation of the
3.
above applications. Investigate the remaining features of the
product support CD as described below, or click the Close button
to remove the window.
4. Remove and store the product support CD.
The middle six buttons in the Contents window of the product support
CD give access to the documents stored on the CD:
To view any document click the corresponding button. The Adobe
Acrobat Reader application needs to be installed on the test PC.
Tuneup
August 2004© Tait Electronics Ltd