Advanced Programming - Vemer Mithos RF User Manual

• In advanced programming it is possible to access the following operation
parameters:
- regulation type
- parameters for regulation type
- antifreeze temperature
- temperature measurement unit
- Setting/Test of the remote activator
- keypad lock password
- system operation hours
- battery charge status
• To enter advanced programming, press
the "PRG" key for more than 3 seconds.
The parameter to be modified will flash;
using " " and "
modify its value. Use " " to confirm
the setting and move on to the next parameter. Once the last parameter has been
confirmed, you will exit the menu and the chronothermostat will restore operation
with the previously set operation.
Regulation type (only for winter operation)
• Field (22) will display the writing "rEG="
and on field (16) letter
"O" (ON-OFF programming)
"P" (proportional programming)
or "tP" (proportional programming to
use if the remote actuator is a valve for
ThermoPro RF radiators) will flash.

ADVANCED PROGRAMMING

" it is possible to
- 48 -
Mithos Chronothermostat User Manual