Vemer Mithos RF User Manual page 54

ON/OFF commands are alternatively sent
every 10 seconds for 10 minutes.
• To exit the modality test press the key
" ".
Note. It is possible to switch from test
mode to set mode using keys "
and " ".
Keypad lock password
It is possible to choose a three digit value
to be used to unlock the keypad.
Field (22) will display the writing "PAS="
and on field (16) the password value
currently set will flash (the default set
value is "123"). Using the "
" " keys, choose a desired value and
press " " to confirm.
To enable/disable the keypad lock,
please refer to the chapter "ADVANCED
FUNCTIONS".
System operation hours
It is possible to display the system
operation hours (relay in ON status).
Field (15) displays the writing "tot="
while fields (22) and (16) will display
the timing value (such value is of 5 digits,
3 on field (22) and 2 on field (16) and
it is to be read from left to right. In the
example the value is of 1274 hours).
"
" and
- 52 -
Mithos Chronothermostat User Manual