Table of Contents
Advertisement
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3 state).
S0 State: Always turn-on the system when power source plugged-in.
S5 State: Always turn-off the system when power source plugged-in.
4.4.6 PCI Express Configuration of PCH-IO
Figure 4-4-6: PCH-IO Settings
DMI Link ASPM Control
Enable/Disable the control of Active State Power Management on SA side of the
DMI Link.
SUMIT B x 1
Enable or disable PCIe device on SUMIT B.
Front-I210-LAN2
Enable or disable I210 LAN.
Rear-I210-LAN3 to LAN6
Enable or disable I210 LAN.
SUMIT A x 1
Bios options for PCIe device on SUMIT A.
Mini PCIe Slot 1 to 4
Bios options for PCIe devices on miniPCIe Slot.
©Vecow ECS-9755/9655 GTX950 User Manual
BIOS AND DRIVER SETTING
80
Advertisement
Table of Contents
