Table of Contents
Advertisement
Figure 5-3 RSA Ethernet settings
7. Enter the values specific to your organization for the IP address, subnet
mask, and gateway.
8. Enter your host name. To eliminate confusion, consider making this field the
same value as the system name under General .
For detailed information about the Ethernet settings, see the Remote
Supervisor Adapter User's Guide .
9. Change the DHCP Setting field to Disabled. The default value is Enabled.
10.Press F6 to apply the changes.
11.Press Esc. After the Warning window opens, press Enter to restart the
Remote Supervisor Adapter.
12.Exit the utility and return to the EFI Boot Manager menu.
You should now be able to connect to the adapter using the static IP address you
supplied.
Tip: For information on how to configure other connectivity options using the
serial port (null modem or PPP), see the Remote Supervisor Adapter User's
Guide .
Chapter 5. Management
123
Advertisement
Table of Contents
